DC102

Check if there is a problem with the SD card. Try formatting the SD card and if that doesn’t work, try replacing the SD card.

There may be a problem with your SD card. Due to the enormous amount of writes, use fast microSD cards of class 10 (max. 32GB).

During recording, the red LED will flash. When you long press the Wi-Fi on/off button (+/- 10 seconds) to format the camera, this LED will stop flashing for a moment and show a constant red light. When the LED starts flashing again, the formatting is complete and the dashcam will start recording again.

Turn on the Wi-Fi of the dashcam by pressing the Wi-Fi button. The camera will display the Wi-Fi activation on the screen.

Disable smart network switch on your smartphone.

When you are connected to the dashcam Wi-Fi, it will automatically turn off after a while (if there is no activity).

This is due to the wrong setting of the light frequency.
Set the frequency 60Hz or 50Hz based on the power supply.

Does the dashcam still display LED signals? Then there is power and there may be something wrong with the SD card. Reset the dashcam and format the SD card and try again. Does the dashcam no longer display LED signals? Then check the power supply.

We offer a 24 month warranty on all our products after purchase (with some exceptions). Unfortunately, we cannot handle products that have become defective due to improper use, fall damage, water damage, etc.

Nordväl DC102 2K Dashcams (front and rear)

32GB micro SD card

AV cable behind camera

12V power cord (cigarette lighter)

5x cable clips

Cable routing tool

USB cable

3M tape front and rear camera

User Manual